The Start of a Fabricated Aluminum Control Console. Straight-line and blending of welded seams.
Metal finishing and metal graining of 3-D parts can be very difficult, especially when it’s an afterthought in the fabrication process. Many custom parts have various shapes, bends, welds and cutouts that make up the finished part. Working around these speed bumps is a challenge that JIT steps up to on a daily basis. Unlike flat material which can be run through an automated wide belt finishing machine, fabricated parts need to be processed by hand. These parts are usually going to be a hi-profile, visible finished product that is going to be touched or viewed up close. Any imperfections at this point will not be tolerated by the client and risk being rejected. This is a position you never want to find yourself in and if you do, JIT is here to bring you across the finish line.
Metal Graining by Metal Artisans
Our metal artisans take metal finishing and metal graining to another level that is often unmatched with our ability to do what most
Inside Face and Edges of 3/8” Structural Stainless Angle.
Straight-line of all surfaces along with an inside radius.
people consider the impossible. Our knowledge of abrasives and the variety of equipment we have allows us to tackle projects other job shops would turn down. Whatever material you are working with or configuration it might be, chances are we are going to be your new best friend when it comes time to make your parts shine. Contact us to see how we can help you with your next metal finishing challenge.
For additional technical information, take a look at our website or contact us at 952-777-0022. We would be happy to provide you with educational information that will be helpful with metal finishing terminology and the many types of finishes JIT Companies, Inc. can provide for you. You can also reach out to us via this online form. Our new Metal Finishing facility in Norwood Young America is ready to tackle your next project!
“Let JIT Companies put the SHINE back into your projects!”
Fabricated Stainless Steel Table Top with Welded Edge Seams. Straight-line #4 Finish to Remove Blemishes During Fabrication.
Structural Stainless Steel Angles. Straight-line #4 Finish on Outside Surfaces of 3/8” Material